Contact Us

Export Sales:Sophie
TEL:+86-13961793184
E-mail:sales@handgroup.com.cn

After Sales:Summer

TEL:+86-17051326705
E-mail:service@handgroup.com.cn

Technology Support:Huiquan Yan
TEL: +86-18601477006
E-mail:china229@handgroup.com.cn

Address: No.321 Wuyun Road, Economic Development Zone, Wuxi City, Jiangsu Province, P.R.China

Home > Knowledge > Content
How to ensure the accuracy of the installation of the construction suspended platform?
Dec 08, 2018

Whether the device of the construction suspended platform is accurate or not directly affects the accuracy, life and function of the fastener. Therefore, in order to ensure the accuracy of the installation of the construction suspended platform, first of all, when cleaning a lot of rotating fasteners, first use hot oil with a temperature of 90 ~ 100 °C to melt the encapsulating oil, but first remove the old oil, then rinse Heat for a few minutes, then rinse with oil to remove the oil and finally clean it with gasoline. After cleaning and cleaning, put on the film and put the rotating fastener on the clean cloth on the workbench or on the paper to dry.


Before constructing the suspended platform device, the appropriate measurement items should be used to view the machining quality of the shaft and the seat hole and the related parts according to the skill requirement rules on the design drawings. When temporarily installing, turn the rotating fastener package and immerse it in a liquid such as gasoline to gently roll it by hand. Make sure that the sealing oil on the holder, the roll body and the raceway surface are completely cleaned.

 

The outer surface of the engineering platform should be cleaned  with a clean solution of gasoline, kerosene, toluene or xylene, and dried with a clean rag, and then coated with a thin layer of lubricating oil, which makes the operation of the device more convenient. If there are bumps, burrs, rust spots or solid particles on the outer surface of the shaft and the fastener seat hole, it will not only make the rotating fastener device difficult, but also the position of the device will be inaccurate, and the solid particles will fall into the fastener. The grinding effect will cause the fastener to wear or scratch when the rotating fastener rotates, so it is necessary to carefully check the device before installation.www.hjplatform.com


Previous: What is the role of the wire rope of a construction lift?

Next: Correct detection of the electric control system of the suspended platform accessories