Contact Us

Export Sales:Sophie
TEL:+86-13961793184
E-mail:sales@handgroup.com.cn

After Sales:Summer

TEL:+86-17051326705
E-mail:service@handgroup.com.cn

Technology Support:Huiquan Yan
TEL: +86-18601477006
E-mail:china229@handgroup.com.cn

Address: No.321 Wuyun Road, Economic Development Zone, Wuxi City, Jiangsu Province, P.R.China

Home > Knowledge > Content
The basic structure of the window cleaning suspended platform and the erection of the vertical horizontal bar.
Sep 19, 2018

The window cleaning suspended platform belongs to a modular platform consisting of front railings, rear railings, floor panels and end installation frames. The components are bolted and have a standard length of 2.5 meters or 2 meters. Its chassis is welded by steel plates and the like, and the bottom plate has anti-slip ripples to ensure the safety of the workers.

 

The end installation frame of the window cleaning suspended platform is welded by steel pipes, and the bottom can be equipped with casters, which is convenient for disassembling and movement during operation. The front railing and the rear railing are welded by steel pipes. The height of the front railing is 970mm, which is installed on the side of the working area. The height of the rear railing is 1120mm.

 

In order to meet the requirements of the working environment of the window cleaning suspended platform, the height of the front and rear beams can be adjusted by adjusting the height of the plunger, and the height is adjusted from 1.15 to 1.75 m. In addition, a roller can be arranged under the front and rear brackets of the platform. For mobile suspension mechanisms, the number of counterweights is configured according to the corresponding model.

 

In addition to the above basic configuration, the window cleaning suspended platform should be equipped with a vertical horizontal rod, but this is not arbitrarily set. The longitudinal horizontal rod is required to be placed inside the pole, and its length should not be less than 3 spans; It is advisable to use the butt fasteners for the horizontal rods and the overlap.

 

When the longitudinal horizontal bars of the window cleaning suspended platform are docked and overlapped, on the one hand, the distance between the joints to the nearest main joint should not be more than 1/3 of the longitudinal distance; on the other hand, the overlap length should not be less than 1 m. The three rotating fasteners shall be fixed at equal intervals, and the edge to the rod end of the end fastener cover shall not be less than 100 mm. In addition, the longitudinal horizontal rod should be used as a support for the horizontal horizontal rod and fixed to the vertical rod with a right angle fastener.https://www.hjplatform.com/

123.png

3.png

Previous: The basic structure of the window cleaning suspended platform and the erection of the vertical horizontal bar.

Next: Aluminum alloy work platform selection skills